Wednesday, August 2, 2017

Update to the mesh gags and some legs restraints

Hi !

There is an update available for your gags as well as all the legs restraints that involve a chain. This is more a hotfix than an update, in fact, and won't change the version number of your restraints. Don't worry, no replacement will be needed to get these fixes. Just remember to save your times.

Please note : If you update your gags while wearing them, you will get a warning from the updater saying it cannot replace the "OpenMouth" item. It isn't clear but it actually means the "OpenMouth" animation, but it will update your "OpenMouth" plugin anyway, so don't mind that warning if you've already got your "OpenMouth" animation updated (it was to be replaced during 1.30 because of a permission issue).

Here is the list of all the changes contained in this small (but very useful) update :

1. Chained legs deforming the shoulders

It has come to my attention that the "Taut_w" animation, which is the animation played when you are walking in the "Taut" lock when the legs are restrained with a chain, was deforming the shoulders of the avatar, even though I paid attention NOT to include bone translation information in that animation. To get this issue fixed, you need to rez the restraint on the ground (the right ankle part, whatever the product is) because the animation is no-copy, so it cannot be downloaded into an attachment directly. There will be no loss of content if you forget, but the updater will just tell you it cannot do it. Please note that not all the legs restraints need this fix, only those that have the "Taut" lock : the Police Legirons, the legs Serious Shackles, the legs Restrained Elegance, the legs Vixens and the legs Deluxe Straps. Thank you Ashlana20 for the heads-up !

The reason for this bug was *probably* the tool itself. I'm not one to blame my tools usually, but this time this is the only reason I can think of, because I specifically paid attention to NOT include bone translation information (what deforms the skeleton) into this animation when I uploaded it the first time, and yet it did anyway. Then I updated the tool before re-uploading the animation, not changing anything else otherwise, and surprise, no bone translation information anymore. Go figure.

2. Deluxe gag chin strap moving by itself

The Deluxe gag's chin strap (and the chin strap of its Bridle if you have it too) tends to move by itself in laggy areas, but it is not the fault of the chin strap, but of the OpenMouth plugin which is contained into every gag. You could update only your Deluxe Gag and it would fix the bug for it, but know that there might be other attachments monitoring the system mouth's animation state, such as the Need For Seed from Marine's Goodies, and those products are impacted by the bug in the OpenMouth plugin as well, which means every single RR gag (except the Isolation Hood which does not have this plugin) should be fixed if you intend to use them along with these other products. But the most immediate and visible occurrence of this bug is the chin strap of the Deluxe Gag, so it is up to you to decide whether to upade the rest or not. Thank you Bunny Hastings for helping me test this bug, and also for your patience because it took a while. Read the end of this blog post for technical details, because this bug was really a weird one to track and fix.

3. Every gag's default animation was named "Default ="

Yeah. Bad me. I don't even know if it caused any weird behavior at all but it sure looked silly on the menu.

4. The override animations of the gags stopped on some furniture

Now this one was really weird. When sitting down on some furniture (such as MP Noir's bunk bed but there are others), all your animations were stopped, which freaked out the OpenMouth plugin if you had set it to use one of its "OpenMouthXXX" override animations. Those animations are special in the sense that they work better on Catwa than the default ones due to the way they are designed, but may cause issues when "Loop" is active and you're sitting on something. Same thing when standing up from what you were sitting on, if the furniture suddenly stops all your animations. To fix this, the gag now waits a few cycles (generally a second or two) before attempting to restart the animation after sitting down or standing up.

5. The Deluxe Gag confuses third-party plugins by controlling ring straps when it shouldn't

The Deluxe Gag's config notecard (with or without bridle) involves ring-related parts when locked on "harness ball", which might confuse some third-party plugins. Now this one is NOT part of this update, unless you want to replace your Deluxe Gag, but you can fix it yourself manually by opening its "*Style config" notecard and removing all the capital "R" letters from the two lines that begin with "4:" and "7:" (these are used by the "Harness ball" and "Total ball" locks of the gag). Save, and it's fixed. Thank you Aida Beorn for the report !

Here is what those two lines should look like after the fix :

4:Harness ball;BJUVY,Harness cock;BQJUVY,Harness bit;BJUIVY,Half cock;BQJVY,Just cock;Q,Half ball;BJVY,Half bit;BJIVY,Invisible;
7:Harness ball;BJUVY,Harness cock;BQJUVY,Harness bit;BJUIVY,Half cock;BQJVY,Just cock;Q,Half ball;BJVY,Half bit;BJIVY,Invisible;

You can find an updater at the following places in-world :

My little shop

Dark Wishes

Roper's Dark Playground

Chorazin's main store

It looks like an orb floating above a pedestal, just click on it and follow the instructions.

Have fun !


PS : So, on to the technical stuff about the chin strap. It works like this : the OpenMouth plugin opens the system mouth (the mouth of your system avatar, you can't see it if you're wearing a mesh head, but it's there) twice per second, while the chin strap checks the mouth's open state once per second. You could ask, why do these two script not communicate together directly instead of relying on an animation state ? Simply because there can be any kind of attachment needing to monitor the mouth's state, and they're not all made by me.

The problem is that the OpenMouth plugin actually has to close the mouth right before opening it again (it doesn't work well otherwise, SL tends to ignore the second animation trigger if the animation is the same, and as this animation is not looped, the mouth closes completely before opening again, when the animation has finally ended). This means that if the chin strap checks the mouth's state at this exact moment, it believes the mouth is closed while it is simply refreshing, and it resizes itself.

And the second problem is that if this happens once, it has a good chance to happen again the next second, and the next one and so on, because both scripts are now stuck in phase (only the former goes twice as fast as the latter) and will remain in phase for a while. This is what made the chin strap move rapidly like that.

The fix was therefore to make the OpenMouth plugin's cycle not be a divisor of 1 second, while staying close to half a second (that's the speed at which the mouth needs to be refreshed in order to look constantly open). I chose 0.47 second. That way, even though the chin strap might still do a check exactly when the OpenMouth plugin refreshes the mouth, it will resize itself once (and back to where it was) but won't stay in phase and won't flap like it did.

Friday, July 7, 2017

RealRestraint update to v1.30

Hi !

As promised, here is the latest update to all the RealRestraint products to v1.30, after updating the RR gags to v1.30.

There are a number of improvements and fixes that require a replacement (I call it "hard update", which is when you select "REPLACE" on the update menu) and others that only require an update ("soft update", which is when you select "UPDATE" on the update menu). It is up to you to decide what you want to get, knowing that getting a replacement means having to resize the product again, and I know it's a pain, even with the copy/paste shape scripts. It won't break your product if you decide to pass on an improvement or on a fix, it will just not work as optimally as it should.

To be clear, v1.30 is a big update and a few products already got updated to that version last month, namely all the gags in the RR line. The Vixen set got a complete overhaul as well because I turned these cuffs from sculpt to mesh, but the set was not upgraded to v1.30 because there was more work to do on all the restraints that are not gags. However, even if you have updated your gags to v1.30 already, I recommend doing a soft update on them again, if you're having trouble with your OpenMouth plugin for example. Please note that I have added two Bento animations to all the gags, in case you don't like the already existing ones, to get them through a soft update you need to rez your gag on the ground. Unlike before, if you forget to do that, the updater won't break your product, it will simply notify you that it can't download no-copy items (that are not scripts) into your worn attachment, because of SL restrictions, but it won't remove the old ones so you can retry later.

In the case of some changes, although you need a replacement to get them, it is easy to do it yourself manually and I will show you how to.

In the following (arm-long) list, I indicate for each feature :
- "U" : You only need to soft-update, meaning choosing "UPDATE" while wearing your object, this is the nicest option.
- "G" : You need to soft-update but after rezzing your object on the ground because some some items inside that are no-copy need to be updated. If you don't rez your object on the ground, the updater won't break it, it will just notify you that it could not replace some of its contents and that you'll have to retry.
- "R" : You need to have your main item replaced (for example, the right wrist cuff of a set of handcuffs), but you can keep using the older secondary items even though you received new ones, so you don't have to resize it all again. They are not deactivated upon replacement, only the main item is, and this particular enhancement does not break the link between both.
- "r" : Same as "R", but only in the case of gags that were already updated to v1.30.
- "A" : You need to replace your whole set, even the secondary items are modified in this one.

Here is a table that sums it all up, hoping this will help you see through this mess :)

A. All restraints

1U. When "/77" is off, calling the restraint with "/77" (for example "/77 fore" to get any restraint worn on "r forearm") will no longer ignore the command, but instead go right to the plugins browser page, meaning the wearer can still access plugins that she should always be able to access, like the texture and OpenMouth plugins.

2U. The keyholder is now able to restrict the wearer from accessing the texture plugins at all. If the "Deny" button is checked, the restraint is locked and the wearer does not have the key (or does but a timer is set), then she won't have access to the plugin. Thank you Aria Warden for helping me test it. Attention, by "Texture plugin" I mean the plugins that control the textures and materials, which means the mesh ball gag and ring gag, the Deluxe gag, the Deluxe straps, the Body harness, the Highbinder and the mesh Vixens. If your ball gag, ring gag and/or Vixens are not mesh, you might want to select "replace" in order to convert them.

3U. I know the RealRestraint_HUD thing might be annoying to some, including yours truly. After all, it was made even before I made the RLV, to simulate restrictions to clicks and third view, as well as blindness. But the RLV handles all those very well if not better now, so if you want to get rid of the HUD, I have made a small change that makes the script totally silent if the HUD object, "RealRestraint_HUD", is not contained in the restraint. It won't attempt to rez it, let alone tell you it is rezzing it. This is a very small change, I am planning on giving you the option to do this through a script later, but for now this will do. So all you have to do is remove the "RealRestraint_HUD" object from your restraint, and you should be ok. However, please be careful to put it back in before attempting a replacement in the future, as it is necessary for the updater to identify your product. Thanks to the people in the RR group chat who gave me this idea.

4U. The communication between the RealRestraint_Base script and the RealRestraint_HUD object was broken when sitting on a very big prim, like 40 m wide, due to how SL handles chat messages coming from avatars when sitting on an object (the chat messages technically come from the center of the prim, rather from the avatar, as the avatar is part of the object while sitting on it). As a result, the restraint would try to rez another HUD every five minutes while sitting on that prim. Thank you Acadia Ansar for helping me track and test this.

5U. The Autolock plugin sometimes lost its lock names and had to be reset, now it should keep its lock names no matter what (until the Anim plugin tells it that the list has changed).

6U. The Vulnerable plugin now displays a "..." after the name of every single third party plugin which declares itself as "vulnerable-compatible" with a ".vuln" parameter somewhere after its name.

7U. The Vulnerable plugin could be accessed via the "Last Plug" button even when locked by someone else. Thank you Morgan Foehammer for the report.

8U. The RR Anim HUD (the thing you wear manually and that you use to control poses, not the RealRestraint_HUD) used to have one texture per button. Silly. Now it uses two atlases, one 512x512 and the other 512x256, which is much easier on video memory. You'll have to detach yours and use the new one you can get from several sources, including the updater itself. The result for this change is also that it switches icons faster, since they are all part of the same two textures now.

9U.  We can now do suspension with the leash without bouncing ! This has been a popular request for years and I have always postponed it but this time it's done. Also when the leash holder is too far (beyond 96 m or beyond length*2, whichever is closer), the sub will not be yanked to them anymore, to avoid being flung in the air when TPing from one place to another in the same sim. This effectively makes leashes longer than 100 m useless but hey, 100 m is no leash, this is a tractor beam.

10A. When locking a cuff while sitting on a bondage furniture, it could stop some of the chains going to it from some of the attachments. To make things saner, I have reorganized the Lockguard networks on the Vixen set, the Restrained Elegance set, the Police set, the Serious Shackles set and the Shibari set (Deluxe straps and Siren ropes didn't need it). This way, no more conflicts and the restraints work much better with bondage furniture now.

B. Arms cuffs and ropes

1R. Added more relaxed "hands back" poses, like in the mesh Vixens. The poses I added are meant to let you have your crossed hands closer to your body, very useful when bending forward.

C. Legs cuffs

1G. Taut_w and TARun (walking and running in "Taut" respectively) were priority 5 on the whole body, whereas they were supposed to be priority 5 on the legs and 3 on the arms to let other brands of arms restraints work nicely with RR legs restraints without being overridden. Fixed now. Be advised that you need to rez your cuff on the ground there before going for a soft update, as the animations are no-copy and SL does not accept downloading no-copy stuff into attachments.

2R. Missing hogtie open when sitting in cuffs.

3R. Replaced the old hogties with the smoother ones from the Shibari/Siren ropes. The old animations were made with Qavimator and looked a bit frantic, while the new ones (well, they were new when the Siren ropes were introduced) were made with Blender, with much more control over the curves, which is why they are smoother.

4R. Reorganized most of the legs animations, added the "Lie" ones where they were forgotten (i.e. in all restraints that don't have a specific "Lie" lock). This makes them all more enjoyable now.

D. Rope and tape

1U. The "RL Time" plugin (in charge of counting time whether you are online or offline) did not return they "keys" to the wearer. Thank you Daisy Rimbaud for the report.

2U. The Wriggle plugin crashed with an error on the legs ropes (thank you Sara555 for the report).

E. All restraints with materials

1A. Ported the little experiment I did for the Vixen set (in short, the shine is automatically colored like the surface instead of white, for a more realistic look) to all the other restraints with appropriate texture plugins, i.e. Highbinder, Pretty Mummy, Body Harness, Deluxe Straps, Deluxe Gag, mesh Ball gag and mesh Ring gag. A complete replacement is required because the change occurs in every secondary item.

F. Vixen set

1A. You can find the full changelog for the gags here if you haven't turned your Vixen set to mesh already. But there are more changes occurring in this update, read on... If your Vixens are still made of sculpties, you will need a replacment, if they are already mesh, you're good.

2A. Removed the VixenCuffTex_slave script from the root prim of the secondary items, we don't need it. If you don't want to replace your set for this, you can safely remove those scripts from all your secondary items, they are not used anymore :

3U. Added the Tex_repeater.vixentex script to the right wrist and ankle vixen cuffs to make the colors, texture and materials resync when reattached.

4A. The straight heel straps were not correctly named, and as a result would not show on the hogties. Their names should be "$1u+2u+4u+5u+6u+7u+9u:1/0" instead of "$1+2+4+5+9u:1/0" (change them yourself if you don't want to have to replace your Vixen legs cuffs for this, use "Edit Linked" to do that and press Ctrl Alt T if they are invisible, and you won't have to reset anything, the change takes effect as soon as the name changes). If you do want to replace, this enhancement impacts only the Vixen legs cuffs, not the arms or the collar.

5U. The Lock_cuffs_1234569 sound contained in the legs Vixens becomes Lock_cuffs_123456789 so the lock sound occurs at every lock.

6U. Reorganized the hogtie anims as the order made no sense, mixing closed and open legs.

G. Gags

1A. You can find the full changelog for the gags here ( If your gags already handle Bento animations (you can tell by checking they have the "OpenMouth" plugin), then you're good. Otherwise your gags totally deserve a replacement.

2G. Replaced the "OpenMouth" animation with one that actually closes the mouth when it is stopped, because apparently the Catwa mesh head needs that (Lelutka doesn't, I can't explain why). The new animation looks exactly the same as before, except it won't leave the Catwa mouth open when ungagged. This also plays nicely with the latest version of the OpenMouth plugin, which has a "Loop" button (but the tests show that it isn't really needed in this case, even though it might be needed for other third party animations). Attention, this is a soft update only if your gags are already v1.30, otherwise you need a replacement.

3G. Added two more "OpenMouth" animations in all gags ("OpenMouthBig" and "OpenMouthVeryBig") to use as overrides, like "OpenMouth" they close the mouth after they stop. I did not make those three animations, Keiyra Aeon (who is a Catwa user) did and authorized me to use them in the gags. Thank you Kei ! I recommend you use some of these as override in the OpenMouth plugin if you don't like the Catwa animations I made originally. I understand, they tend to stretch the lower lip a lot so it doesn't look good on every head. Kei's anims are much less stretched on the lips so you will probably like them better. What's more, they work nicely on Lelutka too, and I believe on other mesh heads. Attention, this is a soft update only if your gags are already v1.30, otherwise you need a replacement.

4U. The Pretty Mummy gag would not cover the ears in "Total", even when "Wrap" is ticked in the "Cover ears" plugin. This error was introduced in the v1.30 update to the gags.

H. Highbinder

1U. The BreastSize plugin, which is initially a Style plugin (same code, different name) now retains the same size for all locks, since the Highbinder straps do not change shape. You no longer have to set your breast size 6 times for the rigged straps to fit your chest. Don't mind a possible script error during the update saying the BreastSize plugin cannot find its notecard, it happens only while the updater is replacing that notecard, the plugin will find it when it's done.

I. Restrained Elegance

1U. Redid the colors in the Color plugin to get a better golden color, and to match some colors of the MdlM catsuits, but be advised that eventually I will turn these shackles into mesh, like I did with the Vixens, meaning that plugin will change again.

2A. The rounded edges of the "hinge" texture of the elbow parts did not have any transparency. I have fixed all seven shackles but since only the elbow ones hide and show, the bug was visible only on those. Although this enhancement requires a full replacement, the only new parts that really need to be used are the two elbow cuffs, you can keep using the other old parts. Also you only need to update the arms cuffs for this one, for the same reason. As you can see on the picture below, only the elbow cuffs show this bug :

3A. The Restrained Elegance collar is now worn on Neck instead of Spine. Although this requires a replacement, you can do this yourself easily simply by wearing it on "Neck" manually and repositioning it. Bonus points if you rename "(spine)" into "(neck)" in its name, but you might have to rez the collar on the ground for this.

J. Isolation Hood

1A. Resized the small invisiprim hidden inside the head to hide the ears on mesh heads. This invisiprim is a sphere that has always been there, if you don't want to replace you can resize this sphere yourself, you will find it inside the head and you can resize it until it covers both ears. Attention, since it is an invisiprim, it won't show with Ctrl Alt T, you'll have to do a bit of searching. If I remember well, the prim is rather small and in the middle of the object, inside the head.


K. Anim plugin

1U. When the sub is "frozen" (i.e. prevented by her keyholder from changing pose with her RR Anim HUD), she can still move if her keyholder is not around and she is not sitting on something (the "frozen" bit is not turned off, though, in case said captor only crashed and is returning shortly). That way you can still simulate holding your sub with your foot on her back, or keeping her in a particular pose on a bondage furniture (for example a strappado) even while you're not there, but if she's not sitting and you're not around, she can move again.

L. Serious collar

1A. Added two Lockguard scripts to two side rings, to spawn chains to furniture like the RF patient bed. Thank you Eevaa Serpente for the heads up.

M. Siren arms ropes

1A. The part with the leash slave in the "Box" lock could still be detached, so we could TP even while leashed. Although this enhancement requires a full replacement of your arms ropes, the only parts that change are the left and right wrist ropes. The rest is unchanged and you can still use it.

N. Deluxe gag and regular mesh ball gag

1A. The balls were turned 180°, so the text would show inside the mouth... It's a bit silly, and if you don't want to replace your gags for this, you can turn those balls manually (with "Edit Linked" checked, don't forget the regular mesh ball gag has two balls instead of one, one for Loose/Medium/Tight and the other for Big/Total). In the pictures below I show you the mesh ball gag with a "Lips R&W" pattern applied onto the ball in white leather material, selected, then rotated and scaled :

Smaller ball selected on the mesh ballgag v1.30 before the fix

The same part, seen from inside the mouth (yes, it is a lot less glamour)

Notice the "Local" setting in the Edit window on the left, this will make it easier to rotate

Rotate the ball by 180° horizontally...

... Scale the texture by 2x on the vertical axis...

... Rotate the ball a little more around the lateral axis, and voilĂ  !

Please note that I did not scale the texture in the update, as it does not play nicely on every texture. So it's your personal choice only.

O. Siren and Shibari

1U. Added seven fur textures to the SirenTex. That's right, fur ! This was Andrew Schufang's initial idea for a custom work, and I must say it looks not too bad :) You can find these additional textures at the end of the list. I find they look better on Shibari ropes than on the Siren ropes, simply because the former are thicker.

That's all ! This update is no way mandatory, but as you can see, there are a number of fixes and improvements that will make your life easier.

You can find an updater at the following places in-world :

My little shop

Dark Wishes

Roper's Dark Playground

Chorazin's main store

It looks like an orb floating above a pedestal, just click on it and follow the instructions.

Have fun !


Wednesday, June 14, 2017

Another update for the RR gags

Hi !

After the big update to the RR gags to v1.30, and a few core features changed, there was a serious need for some fixes, so here they are !

To benefit from these fixes, go to Dark Wishes and get a soft update for your gag (this means choosing "UPDATE" instead of "REPLACE"), but make sure to rez it on the ground first, because there's an animation that needs to be replaced ! Do NOT update your gag while wearing it otherwise you will lose the "OpenMouth" animation and won't be able to get it back. Standard punishment applies if you have to contact me about it. If you don't know what that means, you don't want to know *snickers*

Although only the Dark Wishes updater delivers this update as a soft update, all the other updaters deliver them as hard updates (aka replacements), which means if you want to replace one or more gags, any updater is fine. If your gag is already up to date without these fixes and you want them, go to Dark Wishes.

If you don't want to read on and just want to update without replacing your gag, here is a short recap :

- Go to Dark Wishes
- Rez your gag on the ground
- Update it
- Edit its "*OpenMouth config" notecard
- Turn "default = OpenMouth" into "default ="
- Save it, close it, press "Load notecard" in the OpenMouth plugin's menu
- If you are updating your Deluxe Gag, rez your Deluxe Bridle also (if you have it), edit it, replace its DeluxeGagChinStrap script by the one contained in the folder given to you by the updater.

Done !

If you want all the details, read on :

All gags

The Gag plugin now has a "Silent" switch that lets you turn the gag completely silent, ignoring all speech and emotes, so you can use another gag along with it, even a non-RR one. This was a suggestion I got recently, and the change wasn't difficult so there it is.

The OpenMouth plugin was adamant to open the mouth of the mesh head, whatever it took, defaulting to the "OpenMouth" animation when not finding any other, even when the "default" setting was empty in the "*OpenMouth config" notecard. This wasn't a bug but made by design, but I realize this was a stupid decision on my part. Obviously you may want your gag to not animate your mesh head, for example when you use a third party plugin like PFS to animate your mouth instead (because not everyone likes the animations I made (*) ).

There is one thing you need to do after updating though (no need if you replaced your gag, only if you soft-updated it) : Edit your gag, open the "*OpenMouth config" notecard, transform "default = OpenMouth" into "default =", in other words, stop making "OpenMouth" the default, do not specify any default at all. Once done, save the notecard and close it, then press "Load notecard" in the OpenMouth plugin's menu. Now when you select no brand, no variant and no override, the OpenMouth plugin will no longer animate your mesh head, although it will still animate your system head, allowing for the chin strap of the Deluxe gag (or the face mask of the Need for Seed, or whatever monitors your system head) to resize accordingly.

I've also added a "Loop" button in the "OpenMouth" plugin. By default all mouth animations are looped but it is not always what you want. For example, the L23s animation made by Catwa for the Catwa head works pretty well for such gags as the mouth is open and the lips stretched, but it is made in a way that looping it makes your mouth flap open and closed. The "Loop" button should fix it for you, as it tells the plugin not to constantly restart the current animation. Just so you know, the difference between "Loop", "Autoref" and selecting no brand, no variant and no override is that the first lets the animation play once when turned off (and still opens the system mouth), the second opens nothing at all, it doesn't animate either the mesh head or the system head when turned off, and the third only opens the system mouth and not the mesh head's mouth.

Speaking of L23s, or any other animation you want to use in your RR gags without having to use a third party plugin, all you have to do is insert the animations in your gag after rezzing it on the ground (it doesn't work when wearing it), edit the "*OpenMouth config" notecard and add the names of those anims into the "overrides" list. Then to save the notecard, close it and press "Load notecard" in the OpenMouth plugin's menu.

Lastly, the "OpenMouth" animation was no-transfer, this is the reason why you need to rez your gag on the ground before updating it, because the updater will replace it with a version that is no-copy instead of no-transfer.

Mesh ball gag and ring gag

Those two gags were unable to communicate with the Happy Spanker, which means you wouldn't make gagged yelps when spanked while gagged with one of these.

There was also an issue with the ball gag being unable to open the mouth of the mesh head after having been gagged with a ring gag and wearing both at the same time. This was the same bug as above, it turned out, a failure to communicate with other devices (which is quite ironic for a gag, when you think about it).

Deluxe Gag

The chin strap was decidedly too stubborn, insisting on resetting its position randomly under heavy lag. The reason for this bug was quite technical. You had to be in a laggy sim, Deluxe Gag locked, and the system head's mouth would sometimes close due to the lag (usually when someone TPs in). Then the chin strap script would notice it and resize the strap, so far so good except it would freeze for more than 0.5 s, still due to the lag, and detect the resize as if it was a manual one (that delay was meant specifically to avoid making the script take an automatic resize for a manual one). And it would store it in the "open mouth" slot instead of the "closed mouth" one (that's the second bug). I hope this won't happen again after this fix. Thank you Nico Waxen for helping me test that one.

Please note that the bridle has the same issue, but to fix that one, you need to replace your gag because the updater cannot update it directly, since it is regarded as a secondary item (like a left cuff for example). So to remedy to this, I'm including the DeluxeGagChinStrap script in the update folder you get when you click on the updater, and you can remove the original one from the bridle and put the new one instead. A bit more work for you, but nowhere as much as having to resize your Deluxe Gag again, right ?

Have fun !


(*) I'm aware that the Catwa animations could be better. I do not own a Catwa head and the demos I tried simply looked ugly on me, whatever shape I was using. I literally spent hours trying to make a relatively decent shape, then creating mouth animations for it that wouldn't stretch the lips too much. The result is not ideal yet and I will keep poking at it later. For now, at least, you have other solutions such as third party plugins or even the L23s animation from Catwa that you can set your OpenMouth plugin to use.

Tuesday, June 13, 2017

New product : Cloak of the Initiate

Hi there !

Today, I am releasing a product I had been wanting to make for a while : the Cloak Of The Initiate !

Initiate to what ? I'll let you decide for yourself.


To put it simply, this cloak is designed to hide your body, no matter the bondage going on underneath, and still look inconspicuous. For this, the front and the back of the cloak are quite far from your body so your arms remain concealed (but not enough to make you look fat). Look for yourself, the presets first :

Black rubber. Believe me, it's hot in there !

Black magic, sparkling and suggesting your body underneath

Clear, dry plastic

"I'm singing in the rain..."

Bubbles plastic. Pop... Pop... Pop-pop-pop-pop !

Brown fur. Is this a Jawa ?

Red wool, when it's chilly outside

"Blue jean, I just met a girl named Blue Jean..."

"Black velvet with that slow southern style..."

"Nights in white satin, never reaching the end..."

Those are the ten readily available presets, but there are more materials that you can use...

Rough leather


Patent leather


Polished latex


Plastic wrap (but it doesn't have to be transparent)


Before you ask, the colors and opacities are completely independent from the materials used. You are free to wear green sheer knit, black opaque plastic wrap, white transparent leather (does such a thing exist ?), and so on.

Hidden bondage is fun. Imagine yourself in a public place, wearing only this cloak to hide your tightly bound, naked body from the outside world, your gagged face invisible in the shadow of your hood... and brought to a shop with the instruction of getting it done under half an hour, because the cloak will open by itself after that delay, and there will be nothing you can do to prevent it...

In fact, this cloak is not only designed for hidden bondage, it can be used in other non-kinky RP settings, as it can be customized to a great extent. Color, opacity, materials even like, for example, clear plastic, wet plastic, latex, even sheer knit if you so desire, and so on. Even glitter !

As usual, this blog post serves both as a demonstration showing what this product can do, and a manual showing how to do it once you own this product. If you want to read the manual, scroll down to the "Manual" section.

So what can you do with this cloak ? First of all, you can open it (or someone can open it for you) and even hide it :





Hidden (but it's still worn)

Or you can change its opacity, making it sheer, transparent or even practically invisible. Notice how the face shadow becomes more transparent, or is even hidden as the opacity of the cloak is reduced :

Opaque, nothing shows through

Sheer, you can barely guess the body underneath

Vaporous, it's starting to show, but is more suggested than displayed

See-through, notice there is no more face shadow

Transparent, ok now we see everything

Clear, it's barely there

Please note that only the opaque setting has a shadow map, the other transparencies levels do not and look more plain. I'm considering adding a slightly transparent shadow map for "sheer" (the second level) later. Don't worry, if this happens I will issue an update, which will come at no cost for you.

You can change its color, among the 26 colors I use in a lot of my products, or choose your own custom one. If you are familiar with the RR Deluxe Straps, RR Vixen set and so on, you see what I mean :






I don't need to go on, hm ? I think you get the point.

More interestingly, you can change the material of the cloak. It is made of rubber by default but you can turn that into PVC, latex, plastic, or even leather, wool, fur, knit, jeans... You have 18 materials at your disposal, as you saw above.

Oh and if you really want to see if they shine dynamically, no problem ! Here I am squirming in wet plastic for you :

Of course, to see materials you need to turn on Advanced Lighting Model in your graphics preferences. See the manual section for more info.
Nothing keeps you from making your own textures and/or materials and applying them onto the cloak manually, but be advised that the script is (for now) not able to load its data from a notecard. In other words, it has to be manual and if you modify the textures and materials through the script, you have to re-apply your own afterwards. Changing the color is ok though. A good method for this is to rez the cloak on the ground, the four open states (the fifth state, "hidden", is not linked to any mesh, it just hides the whole object) being one mesh object each, placed in a row. The Ambient Occlusion and UV maps are contained in the box to help you design your own textures (*).

You may have noticed on the pictures that my face is hidden from sight, there's a black shadow blocking the view. It just so happens that this shadow can be made dimmer, or completely opaque, or even invisible, revealing the face :







The shadow automatically adjusts if the opacity changes, naturally, so you don't get nonsense like an opaque shadow inside a transparent hood. It also adjusts with the level of openness of the cloak, if it is open enough the face shadow is reduced.

This is how the Opaque face shadow looks when the cloak is half open

Please note that there is a known bug, one that I will probably not be able to fix since it is a rendering issue. When the shadow is not invisible and the opacity of the cloak is "sheer" or "vaporous", the inside of the hood does not show (more technically, the surface showing the face shadow occludes the hood behind it, regardless of its transparency). This is due to the SL viewer hiding a partly transparent surface behind another when both are rigged, in our case the inside of the hood behind the face shadow surface. To mitigate this, the shadow can be completely hidden by pressing "None", or by choosing one of the three most transparent opacities ("see-through", "transparent" and "clear").

Now, this is all good and well, but you can't always let the wearer keep control on her cloak, right ? It just so happens, it can be locked. And even timered. And its access can be limited.

For example, you may want to keep your girl hidden inside the cloak and not let anyone else but you open it, and of course not let her take it off. Simply lock it and set the access to "keyholder only" (that's the default), and voila !

But you can also let just anyone (except your girl) open the cloak to see what's inside, that's just as easy.

As mentioned above, you can also decide to let the cloak unlock itself after a set time... or even just to open itself or to become transparent without unlocking itself, and then only to unlock after more time has passed. That's right, you can set one timer to do a particular action, then a second timer to actually unlock the cloak.

As you can see, you get a lot of control over who can open and tweak the cloak, whether in public or in private.

You can find the Cloak of the Initiate in any of the Marine's Goodies vendors in-world, it is Modify, Copy and No-Transfer, and costs L$600. The box contains an updater to rez in case an update is available for this product, updates are always free. Also if you ever break your product, rezzing the updater will automatically get you a redelivery.

The pasties, shoes and restraints used in these pictures are not included.

This is the end of the demonstration of this product, the rest of this blog post is the actual manual.


Let's now show you in detail how to operate your Cloak of the Initiate.


To control the cloak, whether you wear it or someone else does, simply click near the stomach of the wearer, there's an invisible prim, a rather big cylinder (but it's mod so it can be resized). The menu lets you open and close the cloak, lock it, change its appearance and so on.

When you have full access, you can open and close the cloak (and all the states in-between), change its appearance, lock and unlock it, set the access and a timer. And if you actually wear that cloak, you also have a "Maintenance" menu that lets you reset it.

One of  the most important sub-menus is the "Appearance" one, which lets you customize the opacity, the color, the material, the shadow and choose a preset.



The main purpose of this cloak is to hide and reveal your sexy body by closing and opening respectively. The cloak has five open states : closed, ajar, half-open, open and hidden, as you saw on the pictures at the beginning of this post.

When you open the cloak in the "half-open" and "open" states, the shadow becomes less strong, even an "opaque" shadow will cover only half of the face. And obviously, if you hide the cloak the shadow is hidden too.

You might notice that when the cloak opens, it does not actually hide the former closed state before showing the open one. Instead, it does this in two sweeps. First it shows the new part to show, then it hides the part to hide. That way you don't see the cloak disappear entirely (revealing the girl's body underneath) for a brief moment before reappearing in a different state, that would be awkward.


The "Opacity" menu lets you choose whether to make the cloak opaque, transparent or almost invisible. The first three opacities ("opaque", "sheer" and "vaporous") have a shadow over the face because they are almost opaque and only suggest the body underneath, the other three ("see-through", "transparent" and "clear") are so transparent that a shadow wouldn't make sense. Please note, as indicated above, that setting to "sheer" or "vaporous" with a non-hidden face shadow will prevent the inner faces of the hood from showing. This is a rendering issue that occurs with alpha rigged surfaces, and I'm afraid there is nothing I can do about it at the moment. In practice though this is not too annoying when the shadow is set to "opaque" or "strong" as you don't really see much through it anyway.

Oh, one thing to keep in mind. When you apply a texture onto your body under the cloak, let's say a bikini over your mesh body, make sure to make that texture masked (on the Maitreya mesh body it is called "mask mode") like I did with my pasties on the pictures here. Otherwise the cloak will not allow them do render if it is transparent. Once again this is the rendering bug we between two transparent rigged surfaces, one hiding the other.


The "Color" menu allows you to change the color of the whole cloak except the buttons (there is no menu for that but feel free to modify their color manually if you want), among the 26 colors I use in many of my other products, be it RealRestraint or Maison de la Marquise ones, to remain assorted. The "CUSTOM" button lets you enter a color by its RGB numbers, either in whole numbers (ex : "128 128 128" for grey) or in vector format (no example for this, sorry, it freaks Blogger out). Entering nothing and clicking "Submit" makes the color totally black.


Materials are what makes the cloak shine dynamically with 3D textures. For example, a shiny reflective plastic surface will shine depending on what lights are around, but also how the camera is positioned. This is very different from what is called "baked lighting", which is merely static shine painted on the texture, but we don't have that here.

This means that your viewer must be set to render materials, for this you need to activate Advanced Lighting Model in your graphics preferences, as well as Local Lights. And it's not just you, anyone else who wants to see your cloak shine must do the same.

If doing so cripples your FPS (Frames Per Second, the speed at which your viewer renders your view in SL), just deactivate the dynamic shadows like this :

Of course there need to be local lights around, at the very least some sun. If you are in an area without any local lights, the cloak won't shine, obviously.

But back to what the cloak can do. It offers you no less than 18 materials ! No need to detail them all here, you've already seen them in the demonstration above. Please note that some materials such as "glitter" and the "plastic" ones have a slight glow, which makes for interesting effects such as the one you see in the "Black magic" preset, where the body is hinted underneath a sparkling sheer cloak.

In fact, it does not even need to shine to look 3D. For example, the "Wool" and "Knit" materials shine very little while being very bumpy, which shows when lit from a shallow angle.


Of course you might feel lazy and not want to set the material, color and opacity manually yourself. This is what presets are for, a good start to let you customize just the bit you want. For example, if you want an opaque green wool cloak, simply choose the "Red wool" preset and turn its color Dark green, since the opacity and material will already be correct at this point.


The "Shadow" menu lets you choose between different strengths for the face shadow. When the cloak is made transparent or open (or both), the shadow becomes dimmer to reflect the change.

What's cool is that since the face shadow is rigged like the rest, you can click through it. For example to gag or blindfold the girl.


By default, anyone can access the cloak until it's locked. And once it is locked, only the one who locked can access its features, and nobody else. In particular the wearer, who cannot detach it not even edit it with the SL edit tools (RLV required for this).

But the keyholder can decide to give others some access, for example to let anyone but the wearer unlock it (this is the equivalent of "leaving the key" on a RR restraint), or to let anyone open and close it, and so on.

There are four access levels : "Keyholder only", "Keyholder & wearer", "Keyholder & public" (meaning everyone but the wearer) and "Everyone" (wearer included). You can decide to change the access individually for the lock options, the appearance options and the open states.

Be aware that the cloak can only operated by touching its unrigged part, which means if the wearer is bound and using RLV, and her self-touch ability is restricted, she will not be able to access her own cloak, which may or may not be what you want.

Let me insist on one point : when the cloak is unlocked, anyone can access it regardless of the access settings. Once locked, only the people specified by the access settings can access its features. For example, if your cloak is set to "Appearance : Key & wearer" and your owner locks it, then only you and your owner can change its appearance, everybody else will be unable to.

Timer, action

The "Timer" menu lets you decide how long the cloak remains locked (if no timer is set, this means "indefinitely"). This timer runs only while the wearer is online.

After the timer, the cloak unlocks... or not. In fact, you are able to decide what action the cloak will take once the timer runs out. It unlocks by default, but thanks to the "Action" menu you can make it open or close, or change opacity (not all opacities are available due to the lack of room on the menu).

If the action you choose is anything else than "Unlock", then there is a second timer available to you, that will run as soon as the first one runs out (and executes the action you've planned instead of unlocking the cloak). If that second timer is set to something other than zero, the cloak will unlock itself after it runs out.

For example, you can send your girl bound in a shopping mall, wearing only her cloak that you've locked on (with a restrictive access... or not), a 30-minute timer with the "open" action and a secondary timer set to one hour, this will result in your girl hurrying with her purchases, then TPing right back home before her nude body is revealed to everyone. And only one hour after the cloak was opened, it will unlock itself.

It is important to remember that the timers only run while the cloak is locked, and they are reset when it is unlocked, even manually.

More over, the wearer can lock herself too. She has access to the menus and can even unlock herself unless she sets a timer. In practice, if either the main timer or the secondary timer is greater than zero, and if the cloak is locked, then the wearer loses the ability to unlock it until the timers run out.


Since the cloak is meant to be worn while bound underneath, and since I've said it was also appropriate for non-kinky play, and since it is not rigged to the arms, there are two free animations included in the box. One crossing your arms in front of you, the other crossing them behind you. They are priority 5 Bento animations so your arms stay inside the cloak at all times.

If you have very generous breasts that tend to swing left and right when walking, that might not be appropriate with this cloak which is not rigged to the breast size (in fact it is not even fitted mesh, it is plain regular mesh, on purpose), as they would clip through it. To fix this I've included a "Hold breasts" physics layer to keep your breasts disciplined and tame.

Since I've been bragging about materials the whole time, the box includes a dim light to wear that will make your cloak shine, if you're not near any local light. This attachment is purely optional.

As mentioned above, the box also contains full perms textures of the shadow maps and UV maps of the four cloak states, so you can design your own textures for it if you like.

Have fun and don't hesitate to flash !


(*) Little bit of a legal disclaimer : The cloak was initially made by Mesh-It, but I have modified it heavily, added the face shadow, created the three open states (since the original mesh was only closed), drawn the hood lower before the face, added the inner faces, redid the UV maps entirely and re-baked the shadow maps. This means I own said UVs and shadow maps and I do have the right to distribute them, since they are not the original ones. You retain all the rights to your own textures (diffuse, normal, specular or anything you can think of) created for these UV maps of course.

PS : There is an Easter Egg in this cloak... and Ashelia Difference found it first ! Congrats Ashelia ! No I still won't say what the Easter Egg is. :p

PPS : Although I'm teasing about nude and bound girls sent to shopping malls, I cannot be held responsible for any outrage experienced after revealing a nude body in a General area. You are entirely responsible for the way you play.